| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222 |
- /**
- ******************************************************************************
- * @file py32f0xx.h
- * @brief CMSIS PY32F0xx Device Peripheral Access Layer Header File.
- * @version v1.0.0
- *
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2023 Puya Semiconductor Co.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by Puya under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
- /** @addtogroup CMSIS
- * @{
- */
- /** @addtogroup py32f0xx
- * @{
- */
- #ifndef __PY32F0xx_H
- #define __PY32F0xx_H
- #ifdef __cplusplus
- extern "C" {
- #endif /* __cplusplus */
- /** @addtogroup Library_configuration_section
- * @{
- */
- /**
- * @brief PY32 Family
- */
- #if !defined (PY32F0)
- #define PY32F0
- #endif /* PY32F0 */
- #if (defined(PY32F030x3) || defined(PY32F030x4) || defined(PY32F030x6) || defined(PY32F030x7) || defined(PY32F030x8))
- #define PY32F030PRE
- #elif (defined(PY32F003x4) || defined(PY32F003x6) || defined(PY32F003x8))
- #define PY32F003PRE
- #elif (defined(PY32F072xB))
- #define PY32F072PRE
- #elif (defined(PY32F002Ax5))
- #define PY32F002APRE
- #endif
- /* Uncomment the line below according to the target PY32 device used in your
- application
- */
- #if !defined (PY32F030x3) && !defined (PY32F030x4) && !defined (PY32F030x6) && !defined (PY32F030x7) && !defined (PY32F030x8) && !defined (PY32F030xx) && \
- !defined (PY32F003x4) && !defined (PY32F003x6) && !defined (PY32F003x8) && \
- !defined (PY32F072xB) && \
- !defined (PY32F002Ax5)
- /* #define PY32F030x3 */ /*!< PY32F030x3 Devices (PY32F030xx microcontrollers where the Flash memory is 8 Kbytes) */
- /* #define PY32F030x4 */ /*!< PY32F030x4 Devices (PY32F030xx microcontrollers where the Flash memory is 16 Kbytes) */
- /* #define PY32F030x6 */ /*!< PY32F030x6 Devices (PY32F030xx microcontrollers where the Flash memory is 32 Kbytes) */
- /* #define PY32F030x7 */ /*!< PY32F030x7 Devices (PY32F030xx microcontrollers where the Flash memory is 48 Kbytes) */
- /* #define PY32F030x8 */ /*!< PY32F030x8 Devices (PY32F030xx microcontrollers where the Flash memory is 64 Kbytes) */
- /* #define PY32F003x4 */ /*!< PY32F003x4 Devices (PY32F003xx microcontrollers where the Flash memory is 16 Kbytes) */
- /* #define PY32F003x6 */ /*!< PY32F003x6 Devices (PY32F003xx microcontrollers where the Flash memory is 32 Kbytes) */
- /* #define PY32F003x8 */ /*!< PY32F003x8 Devices (PY32F003xx microcontrollers where the Flash memory is 64 Kbytes) */
- /* #define PY32F072xB */ /*!< PY32F072xB Devices (PY32F072xx microcontrollers where the Flash memory is 128 Kbytes) */
- /* #define PY32F002Ax5 */ /*!< PY32F002Ax5 Devices (PY32F002Ax5 microcontrollers where the Flash memory is 20 Kbytes) */
- #endif
- /* Tip: To avoid modifying this file each time you need to switch between these
- devices, you can define the device in your toolchain compiler preprocessor.
- */
- #if !defined (USE_HAL_DRIVER)
- /**
- * @brief Comment the line below if you will not use the peripherals drivers.
- In this case, these drivers will not be included and the application code will
- be based on direct access to peripherals registers
- */
- /*#define USE_HAL_DRIVER */
- #endif /* USE_HAL_DRIVER */
- /**
- * @brief CMSIS Device version number V1.0.0
- */
- #define __PY32F0_DEVICE_VERSION_MAIN (0x01) /*!< [31:24] main version */
- #define __PY32F0_DEVICE_VERSION_SUB1 (0x00) /*!< [23:16] sub1 version */
- #define __PY32F0_DEVICE_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */
- #define __PY32F0_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */
- #define __PY32F0_DEVICE_VERSION ((__PY32F0_DEVICE_VERSION_MAIN << 24)\
- |(__PY32F0_DEVICE_VERSION_SUB1 << 16)\
- |(__PY32F0_DEVICE_VERSION_SUB2 << 8 )\
- |(__PY32F0_DEVICE_VERSION_RC))
- /**
- * @}
- */
- /** @addtogroup Device_Included
- * @{
- */
- #if defined(PY32F030x3)
- #include "py32f030x3.h"
- #elif defined(PY32F030x4)
- #include "py32f030x4.h"
- #elif defined(PY32F030x6)
- #include "py32f030x6.h"
- #elif defined(PY32F030x7)
- #include "py32f030x7.h"
- #elif defined(PY32F030x8)
- #include "py32f030x8.h"
- #elif defined(PY32F003x4)
- #include "py32f003x4.h"
- #elif defined(PY32F003x6)
- #include "py32f003x6.h"
- #elif defined(PY32F003x8)
- #include "py32f003x8.h"
- #elif defined(PY32F072xB)
- #include "py32f072xB.h"
- #elif defined(PY32F002Ax5)
- #include "py32f002ax5.h"
- #else
- #error "Please select first the target PY32F0xx device used in your application (in py32f0xx.h file)"
- #endif
- /**
- * @}
- */
- /** @addtogroup Exported_types
- * @{
- */
- typedef enum
- {
- RESET = 0,
- SET = !RESET
- } FlagStatus, ITStatus;
- typedef enum
- {
- DISABLE = 0,
- ENABLE = !DISABLE
- } FunctionalState;
- #define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
- typedef enum
- {
- ERROR = 0,
- SUCCESS = !ERROR
- } ErrorStatus;
- /**
- * @}
- */
- /** @addtogroup Exported_macros
- * @{
- */
- #define SET_BIT(REG, BIT) ((REG) |= (BIT))
- #define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
- #define READ_BIT(REG, BIT) ((REG) & (BIT))
- #define CLEAR_REG(REG) ((REG) = (0x0))
- #define WRITE_REG(REG, VAL) ((REG) = (VAL))
- #define READ_REG(REG) ((REG))
- #define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
- #define HW32_REG(ADDRESS) ( * ((volatile unsigned int * )(ADDRESS)))
- #define HW16_REG(ADDRESS) ( * ((volatile unsigned short int * )(ADDRESS)))
- #define HW8_REG(ADDRESS) ( * ((volatile unsigned char * )(ADDRESS)))
- /**
- * @}
- */
- #if defined (USE_HAL_DRIVER)
- #include "py32f0xx_hal.h"
- #endif /* USE_HAL_DRIVER */
- #ifdef __cplusplus
- }
- #endif /* __cplusplus */
- #endif /* __PY32F0xx_H */
- /**
- * @}
- */
- /**
- * @}
- */
- /************************ (C) COPYRIGHT Puya *****END OF FILE******************/
|