Panel/Drivers/PY32F0xx_HAL_Driver/Inc/py32f0xx_ll_rtc.h

/**
  ******************************************************************************
  * @file    py32f0xx_ll_rtc.h
  * @author  MCU Application Team
  * @brief   Header file of RTC LL module.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) 2023 Puya Semiconductor Co.
  * All rights reserved.</center></h2>
  *
  * This software component is licensed by Puya under BSD 3-Clause license,
  * the "License"; You may not use this file except in compliance with the
  * License. You may obtain a copy of the License at:
  *                        opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
  * All rights reserved.</center></h2>
  *
  * This software component is licensed by ST under BSD 3-Clause license,
  * the "License"; You may not use this file except in compliance with the
  * License. You may obtain a copy of the License at:
  *                        opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __PY32F0xx_LL_RTC_H
#define __PY32F0xx_LL_RTC_H

#ifdef __cplusplus
extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "py32f0xx.h"

/** @addtogroup PY32F0xx_LL_Driver
  * @{
  */

#if defined(RTC)

/** @defgroup RTC_LL RTC
  * @{
  */

/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/

/* Private macros ------------------------------------------------------------*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup RTC_LL_Private_Macros RTC Private Macros
  * @{
  */
/**
  * @}
  */
#endif /*USE_FULL_LL_DRIVER*/

/* Exported types ------------------------------------------------------------*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup RTC_LL_ES_INIT RTC Exported Init structure
  * @{
  */

/**
  * @brief  RTC Init structures definition
  */
typedef struct
{
  uint32_t AsynchPrescaler; /*!< Specifies the RTC Asynchronous Predivider value.
                              This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFFFFF

                              This feature can be modified afterwards using unitary function
                              @ref LL_RTC_SetAsynchPrescaler(). */

  uint32_t OutPutSource;    /*!< Specifies which signal will be routed to the RTC Tamper pin.
                                 This parameter can be a value of @ref LL_RTC_Output_Source

                              This feature can be modified afterwards using unitary function
                              @ref LL_RTC_SetOutputSource(). */

} LL_RTC_InitTypeDef;

/**
  * @brief  RTC Time structure definition
  */
typedef struct
{
  uint8_t Hours;       /*!< Specifies the RTC Time Hours.
                            This parameter must be a number between Min_Data = 0 and Max_Data = 23 */

  uint8_t Minutes;     /*!< Specifies the RTC Time Minutes.
                            This parameter must be a number between Min_Data = 0 and Max_Data = 59 */

  uint8_t Seconds;     /*!< Specifies the RTC Time Seconds.
                            This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
} LL_RTC_TimeTypeDef;


/**
  * @brief  RTC Alarm structure definition
  */
typedef struct
{
  LL_RTC_TimeTypeDef AlarmTime;  /*!< Specifies the RTC Alarm Time members. */

} LL_RTC_AlarmTypeDef;

/**
  * @}
  */
#endif /* USE_FULL_LL_DRIVER */

/* Exported constants --------------------------------------------------------*/
/** @defgroup RTC_LL_Exported_Constants RTC Exported Constants
  * @{
  */

#if defined(USE_FULL_LL_DRIVER)
/** @defgroup RTC_LL_EC_FORMAT FORMAT
  * @{
  */
#define LL_RTC_FORMAT_BIN                  (0x000000000U) /*!< Binary data format */
#define LL_RTC_FORMAT_BCD                  (0x000000001U) /*!< BCD data format */
/**
  * @}
  */
#endif /* USE_FULL_LL_DRIVER */

/** @defgroup LL_RTC_Output_Source         Clock Source to output on the Tamper Pin
  * @{
  */
#define LL_RTC_CALIB_OUTPUT_NONE           (0x00000000U)                       /*!< Calibration output disabled */
#define LL_RTC_CALIB_OUTPUT_RTCCLOCK       BKP_RTCCR_CCO                       /*!< Calibration output is RTC Clock with a frequency divided by 64 on the TAMPER Pin */
#define LL_RTC_CALIB_OUTPUT_ALARM          BKP_RTCCR_ASOE                      /*!< Calibration output is Alarm pulse signal on the TAMPER pin */
#define LL_RTC_CALIB_OUTPUT_SECOND        (BKP_RTCCR_ASOS | BKP_RTCCR_ASOE)    /*!< Calibration output is Second pulse signal on the TAMPER pin*/
/**
  * @}
  */

/**
  * @}
  */

/* Exported macro ------------------------------------------------------------*/
/** @defgroup RTC_LL_Exported_Macros RTC Exported Macros
  * @{
  */

/** @defgroup RTC_LL_EM_WRITE_READ Common Write and read registers Macros
  * @{
  */

/**
  * @brief  Write a value in RTC register
  * @param  __INSTANCE__ RTC Instance
  * @param  __REG__ Register to be written
  * @param  __VALUE__ Value to be written in the register
  * @retval None
  */
#define LL_RTC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))

/**
  * @brief  Read a value in RTC register
  * @param  __INSTANCE__ RTC Instance
  * @param  __REG__ Register to be read
  * @retval Register value
  */
#define LL_RTC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
/**
  * @}
  */

/** @defgroup RTC_LL_EM_Convert Convert helper Macros
  * @{
  */

/**
  * @brief  Helper macro to convert a value from 2 digit decimal format to BCD format
  * @param  __VALUE__ Byte to be converted
  * @retval Converted byte
  */
#define __LL_RTC_CONVERT_BIN2BCD(__VALUE__) (uint8_t)((((__VALUE__) / 10U) << 4U) | ((__VALUE__) % 10U))

/**
  * @brief  Helper macro to convert a value from BCD format to 2 digit decimal format
  * @param  __VALUE__ BCD value to be converted
  * @retval Converted byte
  */
#define __LL_RTC_CONVERT_BCD2BIN(__VALUE__) (uint8_t)(((uint8_t)((__VALUE__) & (uint8_t)0xF0U) >> (uint8_t)0x4U) * 10U + ((__VALUE__) & (uint8_t)0x0FU))

/**
  * @}
  */

/**
  * @}
  */

/* Exported functions --------------------------------------------------------*/
/** @defgroup RTC_LL_Exported_Functions RTC Exported Functions
  * @{
  */

/** @defgroup RTC_LL_EF_Configuration Configuration
  * @{
  */

/**
  * @brief  Set Asynchronous prescaler factor
  * @rmtoll PRLH         PRL      LL_RTC_SetAsynchPrescaler\n
  * @rmtoll PRLL         PRL      LL_RTC_SetAsynchPrescaler\n
  * @param  RTCx RTC Instance
  * @param  AsynchPrescaler Value between Min_Data = 0 and Max_Data = 0xFFFFF
  * @retval None
  */
__STATIC_INLINE void LL_RTC_SetAsynchPrescaler(RTC_TypeDef *RTCx, uint32_t AsynchPrescaler)
{
  MODIFY_REG(RTCx->PRLH, RTC_PRLH_PRL, (AsynchPrescaler >> 16));
  MODIFY_REG(RTCx->PRLL, RTC_PRLL_PRL, (AsynchPrescaler & RTC_PRLL_PRL));
}

/**
  * @brief  Get Asynchronous prescaler factor
  * @rmtoll DIVH         DIV      LL_RTC_GetDivider\n
  * @rmtoll DIVL         DIV      LL_RTC_GetDivider\n
  * @param  RTCx RTC Instance
  * @retval Value between Min_Data = 0 and Max_Data = 0xFFFFF
  */
__STATIC_INLINE uint32_t LL_RTC_GetDivider(RTC_TypeDef *RTCx)
{
  register uint16_t Highprescaler = 0, Lowprescaler = 0;
  Highprescaler = READ_REG(RTCx->DIVH & RTC_DIVH_RTC_DIV);
  Lowprescaler  = READ_REG(RTCx->DIVL & RTC_DIVL_RTC_DIV);

  return (((uint32_t) Highprescaler << 16U) | Lowprescaler);
}

/**
  * @brief  Set Output Source
  * @rmtoll RTCCR         CCO      LL_RTC_SetOutputSource
  * @rmtoll RTCCR         ASOE     LL_RTC_SetOutputSource
  * @rmtoll RTCCR         ASOS     LL_RTC_SetOutputSource
  * @param  RTCx RTC Instance
  * @param  OutputSource This parameter can be one of the following values:
  *         @arg @ref LL_RTC_CALIB_OUTPUT_NONE
  *         @arg @ref LL_RTC_CALIB_OUTPUT_RTCCLOCK
  *         @arg @ref LL_RTC_CALIB_OUTPUT_ALARM
  *         @arg @ref LL_RTC_CALIB_OUTPUT_SECOND
  * @retval None
  */
__STATIC_INLINE void LL_RTC_SetOutputSource(RTC_TypeDef *RTCx, uint32_t OutputSource)
{
  MODIFY_REG(RTCx->BKP_RTCCR, (BKP_RTCCR_CCO | BKP_RTCCR_ASOE | BKP_RTCCR_ASOS), OutputSource);
}

/**
  * @brief  Get Output Source
  * @rmtoll RTCCR         CCO      LL_RTC_GetOutPutSource
  * @rmtoll RTCCR         ASOE     LL_RTC_GetOutPutSource
  * @rmtoll RTCCR         ASOS     LL_RTC_GetOutPutSource
  * @param  RTCx RTC Instance
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RTC_CALIB_OUTPUT_NONE
  *         @arg @ref LL_RTC_CALIB_OUTPUT_RTCCLOCK
  *         @arg @ref LL_RTC_CALIB_OUTPUT_ALARM
  *         @arg @ref LL_RTC_CALIB_OUTPUT_SECOND
  */
__STATIC_INLINE uint32_t LL_RTC_GetOutPutSource(RTC_TypeDef *RTCx)
{
  return (uint32_t)(READ_BIT(RTCx->BKP_RTCCR, (BKP_RTCCR_CCO | BKP_RTCCR_ASOE | BKP_RTCCR_ASOS)));
}

/**
  * @brief  Enable the write protection for RTC registers.
  * @rmtoll CRL          CNF           LL_RTC_EnableWriteProtection
  * @param  RTCx RTC Instance
  * @retval None
  */
__STATIC_INLINE void LL_RTC_EnableWriteProtection(RTC_TypeDef *RTCx)
{
  CLEAR_BIT(RTCx->CRL, RTC_CRL_CNF);
}

/**
  * @brief  Disable the write protection for RTC registers.
  * @rmtoll CRL          RTC_CRL_CNF           LL_RTC_DisableWriteProtection
  * @param  RTCx RTC Instance
  * @retval None
  */
__STATIC_INLINE void LL_RTC_DisableWriteProtection(RTC_TypeDef *RTCx)
{
  SET_BIT(RTCx->CRL, RTC_CRL_CNF);
}

/**
  * @}
  */

/** @defgroup RTC_LL_EF_Time Time
  * @{
  */

/**
  * @brief  Set time counter in BCD format
  * @note   Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
  * @note   It can be written in initialization mode only (@ref LL_RTC_EnterInitMode function)
  * @rmtoll CNTH         CNT            LL_RTC_TIME_Set\n
  *         CNTL         CNT            LL_RTC_TIME_Set\n
  * @param  RTCx RTC Instance
  * @param  TimeCounter Value between Min_Data=0x00 and Max_Data=0xFFFFFFFF
  * @retval None
  */
__STATIC_INLINE void LL_RTC_TIME_Set(RTC_TypeDef *RTCx, uint32_t TimeCounter)
{
  /* Set RTC COUNTER MSB word */
  WRITE_REG(RTCx->CNTH, (TimeCounter >> 16U));
  /* Set RTC COUNTER LSB word */
  WRITE_REG(RTCx->CNTL, (TimeCounter & RTC_CNTL_RTC_CNT));
}

/**
  * @brief  Get time counter in BCD format
  * @rmtoll CNTH         CNT            LL_RTC_TIME_Get\n
  *         CNTL         CNT            LL_RTC_TIME_Get\n
  * @param  RTCx RTC Instance
  * @retval Value between Min_Data = 0 and Max_Data = 0xFFFFFFFF
  */
__STATIC_INLINE uint32_t LL_RTC_TIME_Get(RTC_TypeDef *RTCx)
{
  register uint16_t high = 0, low = 0;

  high = READ_REG(RTCx->CNTH & RTC_CNTH_RTC_CNT);
  low  = READ_REG(RTCx->CNTL & RTC_CNTL_RTC_CNT);
  return ((uint32_t)(((uint32_t) high << 16U) | low));
}

/**
  * @}
  */

/** @defgroup RTC_LL_EF_ALARM  ALARM
  * @{
  */

/**
  * @brief  Set Alarm Counter
  * @note   Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
  * @rmtoll ALRH           ALR         LL_RTC_ALARM_Set\n
  * @rmtoll ALRL           ALR         LL_RTC_ALARM_Set\n
  * @param  RTCx RTC Instance
  * @param  AlarmCounter Value between Min_Data=0x00 and Max_Data=0xFFFFF
  * @retval None
  */
__STATIC_INLINE void LL_RTC_ALARM_Set(RTC_TypeDef *RTCx, uint32_t AlarmCounter)
{
  /* Set RTC COUNTER MSB word */
  WRITE_REG(RTCx->ALRH, (AlarmCounter >> 16));
  /* Set RTC COUNTER LSB word */
  WRITE_REG(RTCx->ALRL, (AlarmCounter & RTC_ALRL_RTC_ALR));
}


/** @defgroup RTC_LL_EF_Calibration Calibration
  * @{
  */

/**
  * @brief  Set the coarse digital calibration
  * @note   Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
  * @note   It can be written in initialization mode only (@ref LL_RTC_EnterInitMode function)
  * @rmtoll RTCCR       CAL           LL_RTC_CAL_SetCoarseDigital\n
  * @param  RTCx RTC Instance
  * @param  Value value of coarse calibration expressed in ppm
  * @retval None
  */
__STATIC_INLINE void LL_RTC_CAL_SetCoarseDigital(RTC_TypeDef *RTCx, uint32_t Value)
{
  MODIFY_REG(RTCx->BKP_RTCCR, BKP_RTCCR_CAL, Value);
}

/**
  * @brief  Get the coarse digital calibration value
  * @rmtoll RTCCR       CAL           LL_RTC_CAL_SetCoarseDigital\n
  * @param  RTCx RTC Instance
  * @retval value of coarse calibration expressed in ppm
  */
__STATIC_INLINE uint32_t LL_RTC_CAL_GetCoarseDigital(RTC_TypeDef *RTCx)
{
  return (uint32_t)(READ_BIT(RTCx->BKP_RTCCR, BKP_RTCCR_CAL));
}
/**
  * @}
  */

/** @defgroup RTC_LL_EF_FLAG_Management FLAG Management
  * @{
  */

/**
  * @brief  Get Alarm  flag
  * @rmtoll CRL          ALRF         LL_RTC_IsActiveFlag_ALR
  * @param  RTCx RTC Instance
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ALR(RTC_TypeDef *RTCx)
{
  return (READ_BIT(RTCx->CRL, RTC_CRL_ALRF) == (RTC_CRL_ALRF));
}

/**
  * @brief  Clear Alarm flag
  * @rmtoll CRL          ALRF         LL_RTC_ClearFlag_ALR
  * @param  RTCx RTC Instance
  * @retval None
  */
__STATIC_INLINE void LL_RTC_ClearFlag_ALR(RTC_TypeDef *RTCx)
{
  CLEAR_BIT(RTCx->CRL, RTC_CRL_ALRF);
}

/**
  * @brief  Get Registers synchronization flag
  * @rmtoll CRL          RSF           LL_RTC_IsActiveFlag_RS
  * @param  RTCx RTC Instance
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_RS(RTC_TypeDef *RTCx)
{
  return (READ_BIT(RTCx->CRL, RTC_CRL_RSF) == (RTC_CRL_RSF));
}

/**
  * @brief  Clear Registers synchronization flag
  * @rmtoll CRL          RSF           LL_RTC_ClearFlag_RS
  * @param  RTCx RTC Instance
  * @retval None
  */
__STATIC_INLINE void LL_RTC_ClearFlag_RS(RTC_TypeDef *RTCx)
{
  CLEAR_BIT(RTCx->CRL, RTC_CRL_RSF);
}

/**
  * @brief  Get Registers OverFlow flag
  * @rmtoll CRL          OWF           LL_RTC_IsActiveFlag_OW
  * @param  RTCx RTC Instance
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_OW(RTC_TypeDef *RTCx)
{
  return (READ_BIT(RTCx->CRL, RTC_CRL_OWF) == (RTC_CRL_OWF));
}

/**
  * @brief  Clear Registers OverFlow flag
  * @rmtoll CRL          OWF           LL_RTC_ClearFlag_OW
  * @param  RTCx RTC Instance
  * @retval None
  */
__STATIC_INLINE void LL_RTC_ClearFlag_OW(RTC_TypeDef *RTCx)
{
  CLEAR_BIT(RTCx->CRL, RTC_CRL_OWF);
}

/**
  * @brief  Get Registers synchronization flag
  * @rmtoll CRL          SECF           LL_RTC_IsActiveFlag_SEC
  * @param  RTCx RTC Instance
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_SEC(RTC_TypeDef *RTCx)
{
  return (READ_BIT(RTCx->CRL, RTC_CRL_SECF) == (RTC_CRL_SECF));
}

/**
  * @brief  Clear Registers synchronization flag
  * @rmtoll CRL          SECF           LL_RTC_ClearFlag_SEC
  * @param  RTCx RTC Instance
  * @retval None
  */
__STATIC_INLINE void LL_RTC_ClearFlag_SEC(RTC_TypeDef *RTCx)
{
  CLEAR_BIT(RTCx->CRL, RTC_CRL_SECF);
}

/**
  * @brief  Get RTC Operation OFF status flag
  * @rmtoll CRL          RTOFF         LL_RTC_IsActiveFlag_RTOF
  * @param  RTCx RTC Instance
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_RTOF(RTC_TypeDef *RTCx)
{
  return (READ_BIT(RTCx->CRL, RTC_CRL_RTOFF) == (RTC_CRL_RTOFF));
}

/**
  * @}
  */

/** @defgroup RTC_LL_EF_IT_Management IT Management
  * @{
  */

/**
  * @brief  Enable Alarm  interrupt
  * @note   Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
  * @rmtoll CRH           ALRIE        LL_RTC_EnableIT_ALR
  * @param  RTCx RTC Instance
  * @retval None
  */
__STATIC_INLINE void LL_RTC_EnableIT_ALR(RTC_TypeDef *RTCx)
{
  SET_BIT(RTCx->CRH, RTC_CRH_ALRIE);
}

/**
  * @brief  Disable Alarm  interrupt
  * @note   Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
  * @rmtoll CRH           ALRIE        LL_RTC_DisableIT_ALR
  * @param  RTCx RTC Instance
  * @retval None
  */
__STATIC_INLINE void LL_RTC_DisableIT_ALR(RTC_TypeDef *RTCx)
{
  CLEAR_BIT(RTCx->CRH, RTC_CRH_ALRIE);
}

/**
  * @brief  Check if  Alarm  interrupt is enabled or not
  * @rmtoll CRH           ALRIE        LL_RTC_IsEnabledIT_ALR
  * @param  RTCx RTC Instance
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ALR(RTC_TypeDef *RTCx)
{
  return (READ_BIT(RTCx->CRH, RTC_CRH_ALRIE) == (RTC_CRH_ALRIE));
}

/**
  * @brief  Enable Second Interrupt interrupt
  * @note   Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
  * @rmtoll CRH           SECIE        LL_RTC_EnableIT_SEC
  * @param  RTCx RTC Instance
  * @retval None
  */
__STATIC_INLINE void LL_RTC_EnableIT_SEC(RTC_TypeDef *RTCx)
{
  SET_BIT(RTCx->CRH, RTC_CRH_SECIE);
}

/**
  * @brief  Disable Second interrupt
  * @note   Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
  * @rmtoll CRH           SECIE        LL_RTC_DisableIT_SEC
  * @param  RTCx RTC Instance
  * @retval None
  */
__STATIC_INLINE void LL_RTC_DisableIT_SEC(RTC_TypeDef *RTCx)
{
  CLEAR_BIT(RTCx->CRH, RTC_CRH_SECIE);
}

/**
  * @brief  Check if  Second interrupt is enabled or not
  * @rmtoll CRH           SECIE        LL_RTC_IsEnabledIT_SEC
  * @param  RTCx RTC Instance
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_SEC(RTC_TypeDef *RTCx)
{
  return (READ_BIT(RTCx->CRH, RTC_CRH_SECIE) == (RTC_CRH_SECIE));
}

/**
  * @brief  Enable OverFlow interrupt
  * @note   Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
  * @rmtoll CRH           OWIE        LL_RTC_EnableIT_OW
  * @param  RTCx RTC Instance
  * @retval None
  */
__STATIC_INLINE void LL_RTC_EnableIT_OW(RTC_TypeDef *RTCx)
{
  SET_BIT(RTCx->CRH, RTC_CRH_OWIE);
}

/**
  * @brief  Disable OverFlow interrupt
  * @note   Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
  * @rmtoll CRH           OWIE        LL_RTC_DisableIT_OW
  * @param  RTCx RTC Instance
  * @retval None
  */
__STATIC_INLINE void LL_RTC_DisableIT_OW(RTC_TypeDef *RTCx)
{
  CLEAR_BIT(RTCx->CRH, RTC_CRH_OWIE);
}

/**
  * @brief  Check if  OverFlow interrupt is enabled or not
  * @rmtoll CRH            OWIE       LL_RTC_IsEnabledIT_OW
  * @param  RTCx RTC Instance
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_OW(RTC_TypeDef *RTCx)
{
  return (READ_BIT(RTCx->CRH, RTC_CRH_OWIE) == (RTC_CRH_OWIE));
}
/**
  * @}
  */

#if defined(USE_FULL_LL_DRIVER)
/** @defgroup RTC_LL_EF_Init Initialization and de-initialization functions
  * @{
  */

ErrorStatus LL_RTC_DeInit(RTC_TypeDef *RTCx);
ErrorStatus LL_RTC_Init(RTC_TypeDef *RTCx, LL_RTC_InitTypeDef *RTC_InitStruct);
void        LL_RTC_StructInit(LL_RTC_InitTypeDef *RTC_InitStruct);
ErrorStatus LL_RTC_TIME_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_TimeTypeDef *RTC_TimeStruct);
void        LL_RTC_TIME_StructInit(LL_RTC_TimeTypeDef *RTC_TimeStruct);
ErrorStatus LL_RTC_ALARM_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_AlarmTypeDef *RTC_AlarmStruct);
void        LL_RTC_ALARM_StructInit(LL_RTC_AlarmTypeDef *RTC_AlarmStruct);
ErrorStatus LL_RTC_EnterInitMode(RTC_TypeDef *RTCx);
ErrorStatus LL_RTC_ExitInitMode(RTC_TypeDef *RTCx);
ErrorStatus LL_RTC_WaitForSynchro(RTC_TypeDef *RTCx);
ErrorStatus LL_RTC_TIME_SetCounter(RTC_TypeDef *RTCx, uint32_t TimeCounter);
ErrorStatus LL_RTC_ALARM_SetCounter(RTC_TypeDef *RTCx, uint32_t AlarmCounter);

/**
  * @}
  */
#endif /* USE_FULL_LL_DRIVER */

/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */

#endif /* defined(RTC) */

/**
  * @}
  */

#ifdef __cplusplus
}
#endif

#endif /* __PY32F0xx_LL_RTC_H */

/************************ (C) COPYRIGHT Puya *****END OF FILE****/