/**
 *  \file MS_features.h
 *
 *  \brief EtherMind Compilation Switches Configuration File.
 *
 *  This file lists all the Compilation Flags available in various
 *  EtherMind Mesh Stack modules.
 */

/*
 *  Copyright (C) 2016. Mindtree Ltd.
 *  All rights reserved.
 */

#ifndef _H_MS_FEATURES_
#define _H_MS_FEATURES_

/* ----------------------------------------------------------------------- */
/* ========== Platform =================================================== */
/* ----------------------------------------------------------------------- */
/*
 *  WINDOWS
 *
 *  This flag is used when the EtherMind stack is being compiled on
 *  Windows User Mode platforms.
 *
 *  Dependency: None.
 */
#define WINDOWS


/* ----------------------------------------------------------------------- */
/* ==== Mesh Specification Flags ========================================= */
/* ----------------------------------------------------------------------- */
/*
 *  MS_1_0
 *
 *  This flag is used when the EtherMind stack is being compiled for
 *  Mesh specification version 1.0.
 */
#define MS_1_0

/* ----------------------------------------------------------------------- */
/* ==== Mesh v1.0 Feature Flags ========================================== */
/* ----------------------------------------------------------------------- */
/*
 *  MS_PROVISIONING_SUPPORT
 *
 *  This flag is used to enable support for Provisioning feature.
 *
 *  Dependency: None.
 */
#define MS_PROVISIONING_SUPPORT

/*
 *  MS_RELAY_SUPPORT
 *
 *  This flag is used to enable support for Relay feature.
 *
 *  Dependency: None.
 */
#define MS_RELAY_SUPPORT

/*
 *  MS_PROXY_SUPPORT
 *
 *  This flag is used to enable support for Proxy feature.
 *
 *  Dependency: None.
 */
#define MS_PROXY_SUPPORT

/*
 *  MS_PROXY_SERVER
 *
 *  This flag is used to enable support for Proxy Server feature.
 *
 *  Dependency: MS_PROXY_SUPPORT.
 */
#ifdef MS_PROXY_SUPPORT
#define MS_PROXY_SERVER
#endif /* MS_PROXY_SUPPORT */

/*
 *  MS_PROXY_CLIENT
 *
 *  This flag is used to enable support for Proxy Client feature.
 *
 *  Dependency: MS_PROXY_SUPPORT.
 */
#ifdef MS_PROXY_SUPPORT
#define MS_PROXY_CLIENT
#endif /* MS_PROXY_SUPPORT */

/**
 * Check if the relevant roles for Proxy are Enabled
 */
#ifdef MS_PROXY_SUPPORT
#if !((defined MS_PROXY_SERVER) || (defined MS_PROXY_CLIENT))
#error "Server or Client SHALL be supported when MS_PROXY_SUPPORT enabled"
#endif /* !((defined MS_PROXY_SERVER) || (defined MS_PROXY_CLIENT)) */
#endif /* MS_PROXY_SUPPORT */

/*
 *  MS_FRIEND_SUPPORT
 *
 *  This flag is used to enable support for Friend feature.
 *
 *  Dependency: None.
 */
#define MS_FRIEND_SUPPORT

/*
 *  MS_LPN_SUPPORT
 *
 *  This flag is used to enable support for Low Power feature.
 *
 *  Dependency: None.
 */
#define MS_LPN_SUPPORT

#ifndef CFG_HEARTBEAT_MODE
#define CFG_HEARTBEAT_MODE 0
#endif


/* ----------------------------------------------------------------------- */
/* ==== Stack Architecture Flags ========================================= */
/* ----------------------------------------------------------------------- */


/* ----------------------------------------------------------------------- */
/* ==== Stack Feature Flags ============================================== */
/* ----------------------------------------------------------------------- */
/*
 *  MS_SUPPORT_STACK_VERSION_INFO
 *
 *  This flag enables EtherMind MS_get_version_number() API.
 *
 *  This API is used to retrieve the current stack build version
 *  information
 *
 *  Dependency: None.
 */
#define MS_SUPPORT_STACK_VERSION_INFO

/*
 *  MS_HAVE_DYNAMIC_CONFIG
 *
 *  This flag enables dynamic configuration of some of the parameters defined in MS_limits.h.
 *
 *  Dependency: None.
 */
#define MS_HAVE_DYNAMIC_CONFIG

/*
 *  MS_DEBUG_ASSERT
 *
 *  This flag enables EtherMind MS_assert() macro, for evaluating truth
 *  value of an expression. For details, refer to BT_assert.h for the
 *  platform.
 *
 *  The MS_assert() macro is used for debugging during development, and
 *  can be excluded in builds for the final product.
 *
 *  Dependency: None.
 */
#define MS_DEBUG_ASSERT

/*
 *  MS_STATUS
 *
 *  This flag enables EtherMind Status Flag APIs for reporting various
 *  Status, as described in BT_status_api.h. The EtherMind Status APIs
 *  are designed and to be used for debugging purposes during development
 *  and can be excluded in builds for final products.
 *
 *  Dependency: None.
 */
/* #define MS_STATUS */

/*
 *  MS_DISABLE_MUTEX
 *
 *  This flag disables the use of mutex and conditional variables from all
 *  stack modules (protocols and profiles).
 *  This should be defined in EtherMind builds where synchronization
 *  primitives are not required (such as, single task build of EtherMind).
 *
 *  Dependency: None.
 */
#define MS_DISABLE_MUTEX

/*
 *  EM_HAVE_STATIC_DECL
 *
 *  This flag enables provision for declaring functions and/or globals in
 *  a file as 'static'.
 */
#define EM_HAVE_STATIC_DECL

/*
 *  EM_HAVE_CONST_DECL
 *
 *  This flag enables provision for declaring globals in a file as 'const'.
 */
#define EM_HAVE_CONST_DECL

/*
 *  VAR_ARG_IN_MACRO_NOT_SUPPORTED
 *
 *  This flag should be enabled if the compiler tool-chain does not support
 *  variable argument in macro.
 */
/* #define VAR_ARG_IN_MACRO_NOT_SUPPORTED */

/*
 *  MS_STORAGE
 *
 *  This flag enables support of the Storage Module
 *
 *  Dependency: None
 */
#define MS_STORAGE

/* ----------------------------------------------------------------------- */
/* ==== Module Inclusion Flags for EtherMind Mesh Modules ================ */
/* ----------------------------------------------------------------------- */
/* Mesh Models */
#define MS_MODEL_CONFIG


/* ----------------------------------------------------------------------- */
/* ==== Module Inclusion Flags for EtherMind Mesh Modules ================ */
/* ----------------------------------------------------------------------- */
/*
 *  Module inclusion flags for various EtherMind Mesh Modules, and should be
 *  defined according to the modules included in the build.
 *
 *  Dependency: None.
 */
#define MS_BRR
#define MS_NET
#define MS_LTRN
#define MS_TRN
#define MS_ACCESS


/*
 *  Topology - Roles.
 *  Only one of the role shall be defined. Edge or Relay.
 */
/*
 *  An Edge node is capable of transmitting and receiving mesh packets,
 *  but does not relay incoming packets.
 */
/* #define MS_ROLE_EDGE_NODE */

/*
 *  A Relay node is capable of transmitting and receiving mesh packets,
 *  and contributes to the multi-hop network infrastructure by relaying
 *  incoming packets, which are authenticated against the network security
 *  credentials.
 */
#define MS_ROLE_RELAY_NODE

/*
 *  Topology - Sub-Roles.
 *  Low Power Node or Friend Relay Node.
 */
/*
 *  A Low Power node is an Edge Node performing low duty cycle scanning.
 */
/* #define MS_SUB_ROLE_LOW_POWER */

/*
 *  A Friend Relay node is a Relay node.
 *  Friend Relay nodes will also allow Low Power nodes to establish friend
 *  relationships with it, and once established will cache packets destined
 *  for the Low Power node.
 */
#define MS_SUB_ROLE_FRIEND_RELAY_NODE


/* ----------------------------------------------------------------------- */
/* ==== Bearer Module Specific Flags ===================================== */
/* ----------------------------------------------------------------------- */

/*
 *  MS_BEARER_ADV
 *
 *  An advertising bearer.
 */
#define MS_BEARER_ADV

/*
 *  MS_BEARER_GATT
 *
 *  A GATT bearer.
 */
/* #define MS_BEARER_GATT */

/*
 * BLEBRR_LP_SUPPORT
 *
 * Enables Low Power Mode interfaces in the bearer.
 */
#undef BLEBRR_LP_SUPPORT


/* ----------------------------------------------------------------------- */
/* ==== Network Module Specific Flags ==================================== */
/* ----------------------------------------------------------------------- */


/* ----------------------------------------------------------------------- */
/* ==== Transport Module Specific Flags ================================== */
/* ----------------------------------------------------------------------- */
/*
 *  MS_TRN_SEND_UNSEG_MSG_SUPPORT
 *
 *  Enables support for sending Unsegmented Transport Message procedure.
 */
#define MS_TRN_SEND_UNSEG_MSG_SUPPORT

/*
 *  MS_TRN_SEND_CTRL_PKT_SUPPORT
 *
 *  Enables support for sending Transport Control Packet procedure.
 */
#define MS_TRN_SEND_CTRL_PKT_SUPPORT

#ifdef MS_TRN_SEND_CTRL_PKT_SUPPORT
/*
 *  MS_TRN_CTRL_FRND_PING_SUPPORT
 *
 *  Enables support for sending Transport Control Packet - Friend Poll procedure.
 */
#define MS_TRN_CTRL_FRND_POLL_SUPPORT

/*
 *  MS_TRN_CTRL_FRND_UPDATE_SUPPORT
 *
 *  Enables support for sending Transport Control Packet - Friend Update procedure.
 */
#define MS_TRN_CTRL_FRND_UPDATE_SUPPORT

/*
 *  MS_TRN_CTRL_FRND_REQ_SUPPORT
 *
 *  Enables support for sending Transport Control Packet - Friend Request procedure.
 */
#define MS_TRN_CTRL_FRND_REQ_SUPPORT

/*
 *  MS_TRN_CTRL_FRND_OFFER_SUPPORT
 *
 *  Enables support for sending Transport Control Packet - Friend Offer procedure.
 */
#define MS_TRN_CTRL_FRND_OFFER_SUPPORT

/*
 *  MS_TRN_CTRL_FRND_CLEAR_SUPPORT
 *
 *  Enables support for sending Transport Control Packet - Friend Clear procedure.
 */
#define MS_TRN_CTRL_FRND_CLEAR_SUPPORT

/*
 *  MS_TRN_CTRL_FRND_CLEAR_CNF_SUPPORT
 *
 *  Enables support for sending Transport Control Packet - Friend Clear Confirmation procedure.
 */
#define MS_TRN_CTRL_FRND_CLEAR_CNF_SUPPORT

/*
 *  MS_TRN_CTRL_FRND_SUBSCRN_LIST_ADD_SUPPORT
 *
 *  Enables support for sending Transport Control Packet - Friend Subscription List Add procedure.
 */
#define MS_TRN_CTRL_FRND_SUBSCRN_LIST_ADD_SUPPORT

/*
 *  MS_TRN_CTRL_FRND_SUBSCRN_LIST_REMOVE_SUPPORT
 *
 *  Enables support for sending Transport Control Packet - Friend Subscription List Remove procedure.
 */
#define MS_TRN_CTRL_FRND_SUBSCRN_LIST_REMOVE_SUPPORT

/*
 *  MS_TRN_CTRL_FRND_SUBSCRN_LIST_CNF_SUPPORT
 *
 *  Enables support for sending Transport Control Packet - Friend Subscription List Confirmation procedure.
 */
#define MS_TRN_CTRL_FRND_SUBSCRN_LIST_CNF_SUPPORT

/*
 *  MS_TRN_CTRL_HEARTBEAT_SUPPORT
 *
 *  Enables support for sending Transport Control Packet - Heartbeat procedure.
 */
#define MS_TRN_CTRL_HEARTBEAT_SUPPORT

#endif /* MS_TRN_SEND_CTRL_PKT_SUPPORT */

/*
 *  MS_TRN_NO_NULL_PARAM_CHECK
 *
 *  This flag disables 'null' parameter check in Mesh Transport APIs
 *
 *  When application using Mesh Transport APIs are validated and
 *  it is ensured that none of the API call path is using
 *  an unexpected 'null' parameter, this flag can be enabled
 *  to reduce the code size.
 *
 *  Dependency: None.
 */
/* #define MS_TRN_NO_NULL_PARAM_CHECK */

/*
 *  MS_TRN_NO_RANGE_CHECK
 *
 *  This flag disables the check in Mesh Transport APIs to verify if the parameter
 *  values are within specification defined valid range
 *
 *  When application using Mesh Transport APIs are validated and
 *  it is ensured that none of the API call path is using
 *  parameters with invalid value, this flag can be enabled
 *  to reduce the code size.
 *
 *  Dependency: None.
 */
/* #define MS_TRN_NO_RANGE_CHECK */

/* ----------------------------------------------------------------------- */
/* ==== Access Module Specific Flags ===================================== */
/* ----------------------------------------------------------------------- */
/*
 *  MS_ACCESS_PUBLISH_TIMER_SUPPORT
 *
 *  This flag enables Publication Timer Support.
 *
 *  Dependency: None.
 */
#define MS_ACCESS_PUBLISH_TIMER_SUPPORT

/* ----------------------------------------------------------------------- */
/* ==== Model Specific Flags ============================================= */
/* ----------------------------------------------------------------------- */
/*
 * Support Generic OnOff Model.
 */
#define HAVE_GENERIC_ONOFF_MODEL

/*
 * Support Generic Level Model.
 */
#define HAVE_GENERIC_LEVEL_MODEL


/* ----------------------------------------------------------------------- */
/* ==== Module Profiling Flags =========================================== */
/* ----------------------------------------------------------------------- */
/*
 *  Profiling related definitions for all the layers (protocol and profiles)
 *  shall be defined in this section.
 */

/*
 *  MS_ENABLE_SPY
 *
 *  If defined, this flag enables module profiling.
 *
 *  Dependency: None
 */
#define MS_ENABLE_SPY

#ifdef MS_ENABLE_SPY
#define BRR_ENABLE_SPY
#define NET_ENABLE_SPY
#define TRN_ENABLE_SPY
#define APP_ENABLE_SPY
#endif /* MS_ENABLE_SPY */


/* ----------------------------------------------------------------------- */
/* ==== Debug Specification Flags ======================================== */
/* ----------------------------------------------------------------------- */
/*
 *  Debug definitions for all the layers (protocol and profiles) should be
 *  defined in this section.
 */

/*
 * By default, the Error Logs of all the layers are enabled.
 * To disable error logging of a module, define <module>_NO_DEBUG flag.
 * Example: Define BRR_NO_DEBUG to disable error logging of Bearer layer.
 *
 * By default, the Trace, Information, Data and other Logs
 * of all the layers are disabled.
 * To enable debug logging of a module, define <module>_DEBUG flag.
 * Example: Define BRR_DEBUG to enable debug logging (Trace and Information)
 * of Bearer layer.
 */

/* Protocol Modules */
#define COMMON_NO_DEBUG
/* #define COMMON_DEBUG */

//#define BRR_DEBUG
#define BRR_NO_DEBUG
/* #define BRR_DEBUG */

//#define NET_DEBUG
#define NET_NO_DEBUG
/* #define NET_DEBUG */

#define LTRN_NO_DEBUG
//#define LTRN_DEBUG
/* #define LTRN_DEBUG */

#define TRN_NO_DEBUG
//#define TRN_DEBUG
/* #define TRN_DEBUG */

#define APP_NO_DEBUG
//#define APP_DEBUG

/* #define APP_DEBUG */

#define STBX_NO_DEBUG
//#define STBX_DEBUG
/* #define STBX_DEBUG */

#define ACCESS_NO_DEBUG
//#define ACCESS_DEBUG
/* #define ACCESS_DEBUG */

#define PROV_NO_DEBUG
//#define PROV_DEBUG
/* #define PROV_DEBUG */

#define CONFIG_NO_DEBUG
//#define CONFIG_DEBUG
/* #define CONFIG_DEBUG */

#endif /* _H_MS_FEATURES_ */